Use In Ear Monitors On Tour Without A Dedicated Engineer

If playing venues without a dedicated sound engineer, you can still benefit from IEMs.

If you’re fortunate enough to be touring with a dedicated monitor engineer, obviously he or she will be responsible for everything monitor related, including your mix(es) and all things wireless.  If you’re touring with only a dedicated FOH engineer, it’s  possible they can assume those responsibilities, or at least part of them.  And if you’re  relying on the venue to provide both monitor and FOH mixes, you can certainly still use IEMs. Below are a few tips and tricks to make sure you get what you need on a nightly basis. 

Approach the venue’s sound engineer well before soundcheck

o    Explain that you’ll be using in ear monitors and that you have your own wireless system. Most sound folks have worked with wireless in ear systems before but some have not. Offer to help if needed or asked.

Know how to connect your transmitters just in case

o    Be knowledgeable on how to connect the venue’s console to the transmitter of your wireless system.

Be prepared. Travel with extra cables and adapters in your toolbox

o    The venues should have these but why take chances? Always keep extra cables for your wireless set-up.
o    Be safe. Pack extra XLR cables, ¼" cables (balanced), XLR > ¼" adapters, and BNC cables (for antennae).

Know how to scan for available frequencies

o    Both Shure and Sennheiser systems have scan functions. Learn how your system works and make sure everyone has a clean frequency.

Always keep an eye on the input meters

o    Both Shure and Sennheiser systems have scan functions. Learn how your system works and make sure everyone has a clean frequency.

Learn everyone’s mix

o    Know the difference between what everyone needs to hear rather than what they like to hear.
o    Keep things simple. Less “clutter” in the mix is a good thing. Only include what is necessary for the performance.

Confirm that the IEMs are properly used

o    Make sure that everyone wraps the stiffening wires around their ears and that they pull the strain relief up to their neck. This secures the monitors in place while they are performing.
o    Cables should be run underneath clothing from the ears to the beltpack. This helps prevent snags during the performance.

 
Previous
Previous

Hearing A Hum Or Buzzing Sound

Next
Next

Change The SL Cable On Your Ultimate Ears Pro IEMs